Bob Lowry Why High Cyanuric Acid Makes Chlorine Weak
- 19m
- Transcript
Summary
Written by a model from the transcript; not yet reviewed.
This episode features a chemistry expert discussing cyanuric acid, commonly known as stabilizer or conditioner, and its impact on pool water balancing and chlorine effectiveness. The guest explains how cyanuric acid was introduced in 1956 to protect chlorine from UV degradation, noting that even thirty parts per million keeps chlorine active eight times longer. However, they examine the drawback that cyanuric acid binds to chlorine, reducing the percentage of free killing chlorine as stabilizer levels rise. The discussion covers how cyanuric acid also buffers pH drops, how it must be factored into the Langolier Saturation Index, and why draining and refilling water remains the most practical method to reduce high concentrations compared to using alum or relying on natural oxidation.
- Maintain cyanuric acid around 30 to 50 parts per million to balance chlorine lifespan and availability. 6:44
- Adjust total alkalinity in the Langolier Saturation Index by subtracting one-third of the cyanuric acid reading. 8:51
- Drain and refill pool water as the cheapest and most effective way to lower high cyanuric acid levels. 10:41
- Understand that cyanuric acid does not evaporate with pure water, causing its concentration to steadily build up over time. 18:03
Chapters
- 0:00Podcast Sponsorships and Intro
Hosts introduce the episode with sponsor messages from Hasa and Skimmer before launching into the main topic.
- 1:04Bob Lowry Intro and Cyanuric Acid Overview
The host welcomes Bob Lowry and sets up the discussion about cyanuric acid and its role in pool chemistry.
- 2:08History and Purpose of Cyanuric Acid
Bob Lowry explains the origins of cyanuric acid, its introduction in the 1950s, and its intended function as a chlorine stabilizer.
- 2:47Cyanuric Acid’s Effect on Chlorine Availability
The conversation dives into how cyanuric acid bonds with chlorine, reducing the free chlorine available for disinfection.
- 7:27Balancing Cyanuric Acid Levels
Bob Lowry discusses optimal cyanuric acid concentrations, the impact on chlorine effectiveness, and the importance of maintaining proper levels.
- 8:07Buffering Role and pH Management
The hosts cover how cyanuric acid acts as a buffer, its interaction with alkalinity, and how it influences pH stability.
- 14:15Removing Excess Cyanuric Acid
Strategies for reducing cyanuric acid, including draining and refilling, alum usage, and the challenges of each method are explored.
- 15:39Cyanuric Acid Degradation and Temperature Effects
The discussion touches on the slow oxidation of cyanuric acid by chlorine, temperature influences, and the molecule’s resilience.
- 16:50Historical Concerns and Safety
Bob Lowry recounts past cancer concerns, regulatory testing, and clarifies cyanuric acid’s safety profile.
- 19:03Practical Takeaways for Pool Operators
The episode concludes with actionable advice on monitoring cyanuric acid, adjusting water chemistry, and maintaining pool health.
Highlights
- 2:08
Introduction of Cyanuric Acidstory
Cyanuric acid was introduced to the pool industry in 1956 to slow down the ultraviolet degradation of chlorine.
- 6:44
Chlorine Availability Percentagesdata
At 30 to 50 parts per million of cyanuric acid, only three percent of the pool's chlorine is available as active killing agent, dropping to one percent at 200 parts per million.
- 8:51
Carbonate Alkalinity Adjustmentstrategy
To calculate carbonate alkalinity for the Langolier Saturation Index, one must subtract one-third of the cyanuric acid value from the total alkalinity reading.
- 11:54
Drawbacks of Alum Treatmentinsight
Using aluminum sulfate to reduce cyanuric acid creates a heavy flocculent layer on the pool bottom that requires very slow vacuuming to waste and risks leaving residual aluminum.
- 16:44
Chlorine Oxidation Limitsinsight
Chlorine slowly oxidizes cyanuric acid at warm temperatures, but running chlorine levels as high as 200 parts per million still fails to wipe out the stabilizer molecule.
Quotes
“Using as little as 30 parts per million of cyanuric acid in the water will keep the chlorine in the pool eight times longer than without it.”
Unnamed speaker · 4:59 “The percentage even at, at around 30 to 50 parts per million of cyanuric acid, only 3% of the chlorine is available.”
Unnamed speaker · 6:44 “Evaporation doesn't lose any Cyanuric acid, but because evaporation is like distillation, only a lot slower.”
Unnamed speaker · 18:03 “If you get up to about 100 parts per million of cyanuric acid, there's only 2% of your chlorine that's available.”
Unnamed speaker · 7:07 “Cyanuric acid does not evaporate out of the pool when you lose water. So it just stays in the pool, and that's why the level keeps increasing.”
Unnamed speaker · 14:56
Sponsored segments
- Hasa 0:00–0:18
- Skimmer 0:27–0:49
- Pool Guide Coaching Program 1:26–1:45
- UPA 9:11–9:38
- Hasa 19:21–19:41
About this episode
Your pool can test “fine” on chlorine and still struggle to stay clear, safe, and algae-free. The missing piece is often cyanuric acid (CYA), the stabilizer that protects chlorine from UV sunlight but also controls how much chlorine is actually active at any moment. When CYA climbs too high, the kill speed drops, problems linger longer, and the fix is rarely just “add more chlorine.” We walk through what cyanuric acid is, why the pool industry embraced it, and the chemistry most people...
Transcript
2,987 words · 3 speakers
Topics
- cyanuric acid
- alum
- Renda blog
- trichlor
- EPA
- Pool Guide Podcast Show
- Bottom Feeder
Page updated · transcript and summary are machine-generated