Skip to content

Bob Lowry on Which Pool Chlorine Is Actually Strongest

The Pool Guy Podcast Show

15m
Transcript

Original podcast

Where to listen

Summary

Written by a model from the transcript; not yet reviewed.

This episode features a discussion on swimming pool chlorine types, busting myths about chemical strength, and exploring how salt chlorination systems operate. The guest breaks down the confusing terminology surrounding chlorine percentages, explaining trade percent versus weight-to-weight percent, and reveals why trichlor tablets are actually around 45 percent chlorine rather than the advertised 90 percent due to gas standard comparisons. The conversation also covers the realities of saltwater pools, addressing common misconceptions about salt levels, electrolysis, voltage requirements, and why the boost button on a chlorinator does not actually shock a pool.

  • A gallon of liquid chlorine contains about one pound of pure chlorine by weight. 3:23
  • Trichlor is technically about 45 percent chlorine, but is labeled 90 percent due to comparison standards with gas chlorine. 7:23
  • Saltwater generators actually produce chlorine gas, sodium hydroxide, and hydrogen gas directly in the water. 4:38
  • Using the boost button on a salt generator only increases its normal output and does not properly shock a pool. 14:16

Chapters

  1. 0:00
    Intro and Sponsorships

    Hosts introduce the episode and list sponsors Hasa and Skimmer.

  2. 1:05
    Bob Lowry Guest Intro

    Host welcomes Bob Lowry and outlines the episode’s focus on chlorine strength.

  3. 1:57
    Chlorine Strength Myths

    Discussion of common misconceptions about liquid vs. trichlor chlorine potency.

  4. 2:29
    Available Chlorine Calculations

    Explanation of weight‑to‑weight, trade, and volume percentages for chlorine products.

  5. 5:41
    Chlorine Gas Standard

    How chlorine gas is used as a benchmark and why only 50% becomes active chlorine.

  6. 6:29
    Dry vs. Liquid Chlorine Comparison

    Comparison of trichlor, diclor, and liquid chlorine in terms of available chlorine per pound.

  7. 7:46
    Byproducts of Chlorine Types

    Discussion of additional chemicals added to water by different chlorine forms.

  8. 8:51
    Saltwater Chlorine Generators

    Overview of how salt generators produce chlorine and related byproducts.

  9. 9:28
    Generator Voltage and Current

    Importance of proper voltage/current for efficient chlorine production.

  10. 12:17
    Salt Levels and Corrosion

    Effects of salt concentration on pool surfaces and electrical grounding.

  11. 13:24
    pH and Shock Considerations

    How salt generators affect pH and why they cannot be used to shock a pool.

  12. 14:46
    Closing and Additional Resources

    Final remarks, coaching program promotion, and outro sponsorships.

Highlights

  • 2:29

    Confusing Chlorine Measurement Termsinsight

    Different terms like weight-to-weight percent, trade percent, and volume-to-volume percent create market confusion when comparing dry and liquid pool chemicals.

  • 3:23

    Liquid Chlorine vs Trichlor Weightinsight

    The guest explains that a gallon of liquid chlorine contains roughly one pound of pure chlorine, while a pound of trichlor contains about 90 percent of a pound.

  • 7:23

    Actual Chlorine Content in Trichlordata

    Trichlor is technically only about 45 percent chlorine by molecular calculation, but the package lists it as 90 percent due to being compared against pure chlorine gas standards.

  • 9:05

    Salt Generators Make Chlorine Gasinsight

    Salt systems do not avoid chlorine; they actually generate chlorine gas, sodium hydroxide, and hydrogen gas from added salt.

  • 10:36

    Voltage Issues in Chlorinatorsstory

    An example is shared of a 26,000 gallon pool where incorrect voltage and current prevented the salt chlorinator from producing its expected output.

  • 11:12

    Salt Level and Deck Corrosioninsight

    Pool water splashout evaporates and leaves behind 100 percent salt, which can corrode aluminum, travertine decks, and handrails.

  • 14:25

    Boost Mode Is Not Shockingstrategy

    Hitting the boost button on a saltwater generator only increases normal output over 24 hours, meaning true shocking requires adding liquid chlorine or cal-hypo.

Quotes

  • “liquid chlorine is really weak because it's only 12.5% compared to the trichlor tablets, which are 99% available chlorine.”
    Unnamed speaker · 1:57
  • “technically, only 50% of that molecule of chlorine is making chlorine in the pool. The other one's making acid.”
    Unnamed speaker · 4:59
  • “trichlor is about 45% chlorine. Because we have to compare it to gas chlorine, we literally have to double it.”
    Unnamed speaker · 7:23
  • “We have a salt pool. We don't use chlorine. And that couldn't be any farther from the truth.”
    Unnamed speaker · 9:28
  • Hasa 0:00–0:19
  • Skimmer 0:27–0:49
  • UPA 8:28–9:04
  • Hasa 15:17–15:26
  • Skimmer 15:26–15:36

About this episode

“Trichlor is 90% available chlorine, so it must be the strongest” sounds logical until you follow the math all the way through. We sit down with Bob Lowry to untangle the biggest chlorine strength myth in pool care, breaking down what “available chlorine” actually means, why the industry compares everything to chlorine gas, and how a percentage on a bucket can mislead even experienced pool owners and pool service pros. We talk through the practical way to think about dosing: pounds of chlori...

Transcript

0:00
15:39

2,219 words · 3 speakers

Topics

  • Chlorine gas
  • Trichlor
  • Liquid chlorine
  • Voltage
  • Sodium hydroxide
  • Hydrogen gas
  • pH
  • Diclor
  • Cyanic acid
  • Bonding

Page updated · transcript and summary are machine-generated