The rush for clean, on-site power [partner content]
- 31m
- Transcript
Summary
Written by a model from the transcript; not yet reviewed.
This episode explores the surging demand for clean, on-site power driven by data centers, semiconductor fabs, and other commercial and industrial users facing grid constraints. The host, Stephen Lacy, talks with Aman Joshi, chief commercial officer at Bloom Energy, about why growing numbers of large energy consumers are viewing on-site fuel cells not as temporary bridge power, but as permanent infrastructure. They discuss how factors like multi-year grid interconnection delays, the hidden costs of transmission and distribution, and fierce local community pushback against combustion emissions and water usage are reshaping corporate energy strategies.
Joshi argues that solid-state fuel cells offer a science-based advantage over legacy gas turbines by eliminating combustion, reducing water consumption, and fitting into high-efficiency architectural trends like DC power and heat recovery. The conversation highlights how the traditional levelized cost of electricity metric falls short for on-site power, and why the future of digital-age energy infrastructure is increasingly distributed rather than centralized.
- Consider treating on-site power as a permanent asset rather than a temporary bridge to future grid connections. 6:24
- Factor in transmission, distribution, and transformer upgrade costs when comparing grid electricity prices to on-site generation. 4:49
- Evaluate local community impact regarding emissions and water usage to avoid permitting pushback on large industrial projects. 12:45
- Look beyond standard levelized cost of electricity metrics and evaluate total delivered cost per watt including reliability and heat management. 24:49
Chapters
- 0:03Introduction and Host Overview
The host introduces the Frontier Forum and sets the stage for a discussion on onsite power generation.
- 0:48Bloom Energy’s Role in Onsite Power
Bloom Energy’s fuel cell systems are positioned to meet the growing demand for rapid, clean onsite power.
- 1:18Customer Demand Surge and Survey Findings
Bloom’s 2024 survey reveals a near tripling of interest in onsite power, with projections for 2030 and 2035 adoption.
- 2:12Community Concerns and Fuel Cell Advantages
The conversation highlights community pushback on emissions, water use, and noise, and how fuel cells offer lower impacts.
- 5:19Permanent vs. Bridge Power Decision
Customers are increasingly viewing onsite power as a permanent solution rather than a temporary bridge to the grid.
- 7:13Economic Misconceptions of Grid vs. Onsite Power
Aman explains how grid infrastructure costs inflate delivered electricity prices, making onsite power more economical.
- 16:08Environmental Impact and Community Acceptance
The discussion covers how emissions and water usage from traditional turbines drive community opposition and fuel cell preference.
- 18:20Future Outlook: Second to Third Innings Transition
Aman outlines the next phase of onsite power adoption, emphasizing DC architecture and absorption chillers.
- 21:13Broader CNI Market and Industrial Adoption
Bloom’s solutions are expanding beyond data centers to semiconductor fabs, food production, and automotive manufacturing.
- 24:03Energy Team Sophistication and LCOE Relevance
The host probes the evolving energy teams in companies and the shift from LCOE to total delivered cost metrics.
- 29:13Ninth Innings Vision for Distributed Energy
The conversation concludes with a vision of a predominantly distributed, clean, and reliable energy infrastructure.
Highlights
- 1:35
Surging Demand For On-Site Powerdata
Customer surveys conducted by Bloom Energy reveal that interest in on-site power generation grew from 13 percent in 2024 to 35 percent by April, with half of respondents planning their energy needs around it by 2035.
- 2:18
Community Pushback On Local Emissionsinsight
As data centers and industrial facilities scale up, communities are increasingly pushing back against the pollution, water consumption, and noise associated with traditional combustion-based power generation.
- 7:13
Hidden Costs In Grid Powerinsight
While raw power generation might cost six to eight cents, adding step-up transformers, high-voltage transmission lines, substations, and distribution infrastructure significantly drives up the final delivered cost of grid electricity.
- 16:14
Oracle Switches To Bloom Energystory
Oracle completely switched a large 2.5-gigawatt project in New Mexico from combined and open cycle turbines to Bloom Energy fuel cells to address community feedback and ensure responsible corporate citizenship.
- 18:53
Shift To DC Power Architecturestrategy
Hyperscalers and data center operators are adopting 800-volt DC architecture for on-site power, which eliminates the need to convert AC power and reduces capital expenses for customers.
- 24:49
Why LCOE Fails For On-Site Powerinsight
The traditional levelized cost of electricity metric is fundamentally wrong for on-site power because it fails to account for overbuild requirements for reliability, community attributes, and AI load-following capabilities.
Quotes
“Bloom can manufacture and deploy its modular systems much faster than conventional power plants and without waiting years for a grid connection.”
Unnamed speaker · 1:18 “And that is where, quite frankly, fuel cells have just a science-based advantage because we don't combust.”
Unnamed speaker · 2:32 “why speed, reliability, and community acceptance are central to power decisions.”
Unnamed speaker · 4:13 “That's going to be anywhere between $5 to $10 a megawatt hour.”
Unnamed speaker · 7:30 “You know, it's one gigawatt times 1,000 times 24 hours times, you know, so you multiply all that.”
Unnamed speaker · 13:21
Sponsored segments
- Latitude Studios 0:03–0:06
- Bloom Energy 30:21–31:13
About this episode
This is a partner episode, brought to you by Bloom Energy. Long interconnection queues, fragile supply chains, and a lack of grid capacity are pushing a wide range of C&I customers to invest in distributed, on-site power. But as data centers and other industrial facilities build more power behind the meter, new challenges have emerged. Air quality, noise, and water use are top concerns for local communities, making cleaner solutions like fuel cells much more attractive. This shift within the data center industry is starting to shape energy decisions in the broader C&I sector across retail, healthcare, higher education, and manufacturing. In this Frontier Forum, Stephen Lacey talks with Aman Joshi, chief commercial officer at Bloom Energy, about how the scramble for electricity is changing how large energy users plan their power. In this new landscape for large loads, Aman explains why more customers are planning to permanently stay disconnected from the grid; how the familiar cost-per-megawatt-hour calculation can fall short; and why speed, reliability, and community acceptance are central to power decisions. This conversation was recorded live as part of Latitude Media’s Frontier Forum with Bloom Energy. You can access the full video here.
Transcript
4,705 words · 3 speakers
Topics
- grid
- data center
- electricity
- CNI
- AI
- LCOE
- Bloom Fuel Cells
- natural gas
- DC architecture
- Bloom Solutions
Page updated · transcript and summary are machine-generated