Pod Insights The Real Estate Espresso Podcast Sub Metering to Control Apartment Expenses About this episode On today’s show we are talking about how to gain additional control over the expenses in your commercial buildings. Some buildings were designed with a single electric meter and a single water meter. This makes it difficult for a landlord to recoup the costs associated with these variable expenses. Some buildings use a RUBS method. RUBS is an acronym which stands for Ratio Utility Billing System. Instead of each unit having its own meter to measure individual consumption, the total cost of the utility for the entire property is divided among the tenants based on a predetermined formula. The problem with all of these methods is that the tenant is left wondering if they are paying more than their fair share of the utilities. If the landlord is watering the grass, then they wonder if the tenant is paying for excessive watering rather than their own direct utilization. It ends up being an irritant to tenants who never fully trust the monthly billing as being accurate. The other approach is to sub-meter. The building owner still gets a single bill for water, and for electricity. But by sub metering, the actual usage for each unit can be determined. -----------**Real Estate Espresso Podcast:** Spotify: [The Real Estate Espresso Podcast](https://open.spotify.com/show/3GvtwRmTq4r3es8cbw8jW0?si=c75ea506a6694ef1) iTunes: [The Real Estate Espresso Podcast](https://podcasts.apple.com/ca/podcast/the-real-estate-espresso-podcast/id1340482613) Website: [www.victorjm.com](http://www.victorjm.com) LinkedIn: [Victor Menasce](http://www.linkedin.com/in/vmenasce) YouTube: [The Real Estate Espresso Podcast](http://www.youtube.com/@victorjmenasce6734) Facebook: [www.facebook.com/realestateespresso](http://www.facebook.com/realestateespresso) Email: [[email protected] ](mailto:[email protected] ) **Y Street Capital:** Website: [www.ystreetcapital.com](http://www.ystreetcapital.com) Facebook: [www.facebook.com/YStreetCapital](https://www.facebook.com/YStreetCapital) Instagram: [@ystreetcapital](http://www.instagram.com/ystreetcapital)
Transcript 0:01 Speaker 00 Welcome to the Real Estate Espresso Podcast, your morning shot of what's new in the world of real estate investing. I'm your host Victor Manash. On today's show, we're talking about how to gain additional control over the expenses in your commercial buildings and your residential multifamily apartment buildings. Some buildings were designed with a single electric meter and a single water meter. It makes it difficult for the landlord to recoup the costs associated with these variable expenses. Some buildings use a RUBS method. RUBS is an acronym that stands for Ratio Utility Billing System. It's a method used by landlords primarily in multifamily apartments to allocate the costs of shared utilities like water, gas, electric, trash, and so on. Instead of each unit having its own meter
0:43 Speaker 00 to measure individual consumption, the total cost of the utility for the entire property is divided among the tenants based on a predetermined formula. Some of the common factors used in a RUBS formula include the square footage of the unit. Larger units are typically allocated a higher portion of the utility costs. It might be based on the number of occupants. Units with more residents are assumed to consume more utilities. Maybe it's based on the number of bedrooms and bathrooms. That could also be an indicator of higher water usage. Or a combination of these factors with different weightings. For example, 50% might be based on square footage and 50% based on occupancy. And then you might have a special provision for certain appliances. For example, a washing machine and dishwasher, other higher usage appliances would obviously consume more than if you
1:28 Speaker 00 didn't have those things. The problem with all these methods is that the tenant is left wondering if they're paying for more than their fair share of utilities. If the landlord is watering the grass, then they wonder if a tenant's paying for excessive watering rather than their own direct utilization. It ends up being an irritant to tenants who never fully trust the monthly billing as being accurate. The other approach is to sub-meter each unit. The building owner still gets a single bill for water, for electricity from the utility, but by sub-metering, the actual usage for each unit can be determined. More importantly, sub-metering can save a lot of wasted expense. The number one source of wasted water are leaks in either toilets or sinks. If a seal is failing in a valve, those drips can add up.
2:10 Speaker 00 A single drip per second can add up to 1,600 liters of extra water a year. That's about 400 gallons. A leaking toilet can be a severe consumer of water, up to 100 gallons an hour or even more. That could translate into three quarters of a million gallons, or 3 million liters a year, from just one failed toilet. One of the major objections to sub-metering is the perception that it's difficult or costly to retrofit in an existing property. The truth is, these devices are not that expensive and they're incredibly easy to install. The electrical connection is not invasive. It's a clamp that wraps around a single wire in the breaker panel. And a data connection is needed to communicate with a cloud-based service. The same technology is used for the water meter to communicate with the cloud-based service. Now, when it comes to the water meter, there's two basic systems.
2:53 Speaker 00 There are Doppler meters that measure the flow of water in the pipe. These meters wrap around the outside of the pipe. They don't require a plumber to install them. It's the simplest of all retrofits. The downside is that they're less accurate than an inline meter. They're also more expensive than an inline meter, but then you save on the installation. An inline meter requires cutting the pipe and inserting the meter. It's a fairly quick installation because each meter is only going to require two cuts and two connections. If the existing pipe is made out of packs, then the connection will only take a couple of minutes for each meter. If you're dealing with a copper connection, then soldering and shielding the combustible materials from the torch definitely adds some time for each connection. There's several decisions to make with the choice of sub-metering. Number one, where are you going to locate the sub-meters?
3:37 Speaker 00 You want to put them in a location where they can be serviced by your maintenance people, but are otherwise inaccessible to tenants to prevent the tenants from tampering with the meters. As you know, they will. It's just a matter of time. Number two, who's going to take the measurements, produce the invoice, and collect payment? Is it going to be a third party, or is it going to be integrated into your property management? If it's integrated, you want to choose a system that's going to integrate seamlessly with your property management software. If you choose a third party, then the third party is ultimately going to choose the technology because it's going to work with their billing system and so on. If you choose to go the in-house route, you want to make sure the technology lifecycle is going to be in line with the building lifecycle. We know that technology products have a relatively short lifecycle.
4:20 Speaker 00 If a submeter fails 15 years from now, are you going to be able to source a replacement part that will integrate seamlessly into your system? That's a consideration, and so you want to be budgeting for an inventory of spares that will last long enough that you won't be facing a wholesale replacement of your system 15 years down the road. And then finally, the choice of specific manufacturer will depend to some extent on the local trades in your market, their familiarity and experience with installing and supporting these products. I could make a recommendation for you on what we might choose, but it's probably not going to be helpful because your local trades may not support that specific product in your local market. Purpose of today's show is to get you looking at the solutions that are prevalent in your local market. There's a lot of choice out there, and there's a lot of new entrants in the market.
5:03 Speaker 00 As you think about that, have an awesome rest of your day. Go make some great things happen, and we'll talk to you again tomorrow.
Previous Property Failing Due Diligence Next When Idealism Confronts Reality Page updated November 15, 2026 · transcript and summary are machine-generated