Pod Insights The Real Estate Espresso Podcast How To Perform A Site Assessment About this episode On today’s show we are talking about the design of a multi-unit building on a property that was originally designed for a single family home. There are many urban infill opportunities in major cities across North America. Earlier this week I was looking at a property for a consulting client that has the potential to be redeveloped from a single family home to a six unit apartment building. On today’s show I’m going to take you through the thinking of how we analyze this property to determine the basic feasibility. There are many aspects to this. There is the physical, can I get this to fit on the property in a reasonably cost effective manner. There is the financial where we analyze all of the financial levers in the project. We’re not going to talk about that today, we are just going to talk about the physical aspects of getting a project that complies with the zoning and will be sensible to build. ------------**Real Estate Espresso Podcast:** Spotify: [The Real Estate Espresso Podcast](https://open.spotify.com/show/3GvtwRmTq4r3es8cbw8jW0?si=c75ea506a6694ef1) iTunes: [The Real Estate Espresso Podcast](https://podcasts.apple.com/ca/podcast/the-real-estate-espresso-podcast/id1340482613) Website: [www.victorjm.com](http://www.victorjm.com) LinkedIn: [Victor Menasce](http://www.linkedin.com/in/vmenasce) YouTube: [The Real Estate Espresso Podcast](http://www.youtube.com/@victorjmenasce6734) Facebook: [www.facebook.com/realestateespresso](http://www.facebook.com/realestateespresso) Email: [[email protected] ](mailto:[email protected] ) **Y Street Capital:** Website: [www.ystreetcapital.com](http://www.ystreetcapital.com) Facebook: [www.facebook.com/YStreetCapital](https://www.facebook.com/YStreetCapital) Instagram: [@ystreetcapital](http://www.instagram.com/ystreetcapital)
Transcript 0:01 Speaker 00 Welcome to the Real Estate Espresso Podcast, your morning shot of what's new in the world of real estate investing. I'm your host Victor Manash. On today's show, we're talking about the design of a multi-unit building on a property that was originally designed for a single-family home. There's many urban infill opportunities in major cities across North America. Earlier this week, I was looking at a property for a consulting client that has the potential to be redeveloped from a single-family home into a six-unit apartment building. On today's show, I'm going to take you through the thinking of how we would analyze this property to determine the basic feasibility. There's several aspects to this. There's the physical, can I get this to fit on a property in a reasonable and cost-effective manner? There's the financial, where we analyze all of the financial levers in the project.
0:46 Speaker 00 And we're not going to talk about the financial aspect today, we're just going to talk about the physical aspects of getting a project that complies with the zoning and will still be sensible to build. If you've been listening to the show for a while, you'll know that the limiting factor in almost any design is the availability of parking. Doesn't matter whether the city says you need less parking or not, the fact is clients usually demand it. Property in question is 150 feet deep and 50 feet wide. So the first thing we need to look at is to whether there's enough gross floor area within the setbacks of the zoning and the height restriction to comfortably fit six units. If we establish that the property can support six decent-sized apartments, then the next question will be how much parking
1:27 Speaker 00 can you cost-effectively include in the property? Property is an area that is prone to high water due to the proximity of a major river. Now, it's not in a flood zone, but it's not 100% clear that you could build a full basement level for living quarters, maybe you could do it for structured parking underground, that's something that still needs to be determined. We'll start with the zoning. We always go directly to the city's published zoning code to confirm the rules. That means reading all the fine print. We look at any proposed changes to the zoning legislation, which in this case, there are. So we need to look both forward and backwards to determine the best window in time to consider building the building. The original zoning, historically, only supported two stories. The current zoning supports-
2:10 Speaker 00 Three stories and I think that's actually going to be enough to build six units comfortably. The front yard setback from the property line is 20 feet and the rear yard setback is 25. So out of the 150 foot depth, we actually have plenty of space. In fact, 105 feet to put the building between the front and the rear setbacks of the building is not going to be a problem. We're not going to need anywhere near that to fit a building. The width of the property is a little more problematic. At 50 feet wide, we have minimum four foot side yard setbacks. So that means the widest the building can be is 42 feet. And if we build according to the minimum setback on the side, then we'll be forced to build very expensive non-combustible construction for the sidewalls. And that's going to cost tens of thousands more than the wood frame equivalent.
2:54 Speaker 00 So we'll want to shrink the building a little further to get away from the requirement to build non-combustible structures. Let's say that the maximum width of the building now is going to be, say, 40 feet. Now, we know the city won't allow for front yard parking. They will allow for side yard parking, but you don't really have the space. The problem is you're going to need about 12 feet to create a drive aisle to the rear of the building. And if we do that, now we've shrunk the building further. The maximum width of the building is going to be shrunk by another seven feet down to 35 feet. And if we divide that down the middle, the apartments are only going to be 16 feet wide when you take wall thickness into account. It's still workable, but it's starting to get more difficult to design an optimal design.
3:36 Speaker 00 In dense urban environments like Philadelphia, we built many townhouses in 16 feet with no problem. And we've also built a few that were 14 feet wide. Now, I don't recommend that. It's not ideal, but sometimes you have to work with what you have. Now, when we look at the dimensions of the apartments, we can easily create enough space for six apartments that measure 880 square feet each. That'll be a two bedroom apartment and there's sufficient rear yard parking for six cars. There are other solutions that would involve building a larger building on the second and third floor. Maybe having the building overhang the drive aisle. But that's going to be very expensive structurally to build and probably not worth the extra cost. The other option is to examine whether the basement level could be used to park six cars.
4:20 Speaker 00 That would in fact require growing the building to a depth of 60 feet and a width of 40. That's going to make the building considerably bigger than it needs to be. And the placement of the columns in the basement would need to allow for ample turning radius. The result would be much larger building where each apartment would measure 1,200 square feet. Now that's a large apartment and frankly, the added cost of construction would be difficult to justify because you're not going to get that much more in rent for a much larger apartment in that location. So on today's show, we've not looked at any of the detailed numbers like rent or construction costs and we have not done a full underwriting of the project. But what we can determine is that there is sufficient gross floor area to build six decent sized apartments and also allow for sufficient parking.
5:03 Speaker 00 If the property was smaller, say at 50 by 110, it would be a much more difficult proposition. You'd have a hard time fitting the building and the parking on the property. You would have to compromise and only deliver maybe one bedroom apartments instead of two bedroom apartments. But at 50 by 150, property seems very workable for both parking and six good sized apartments. This is the first step in determining the feasibility. Will the desired product actually fit on the property without forcing any unnatural design decisions that would drive a lot of extra cost or compromise the functionality? This is how we perform that first step of initial feasibility assessment on what is by any measure a fairly simple project. As you think about that, have an awesome rest of your day. Go make some great things happen. We'll talk to you again tomorrow.
Previous From Architect To Investor with Mark Shuler Next Luxury Short Term Rentals with Fahad Farhat Page updated November 15, 2026 · transcript and summary are machine-generated