Pod Insights The Real Estate Espresso Podcast Cheaper Faster Lighter Concrete Buildings About this episode On today’s show we are taking a look at a construction technology that could revolutionize the way concrete buildings and light gauge steel structures are built. The technology is called Hambro and we are using right now for the construction of six buildings. ------------- **Real Estate Espresso Podcast:** Spotify: [The Real Estate Espresso Podcast](https://open.spotify.com/show/3GvtwRmTq4r3es8cbw8jW0?si=c75ea506a6694ef1) iTunes: [The Real Estate Espresso Podcast](https://podcasts.apple.com/ca/podcast/the-real-estate-espresso-podcast/id1340482613) Website: [www.victorjm.com](http://www.victorjm.com) LinkedIn: [Victor Menasce](http://www.linkedin.com/in/vmenasce) YouTube: [The Real Estate Espresso Podcast](http://www.youtube.com/@victorjmenasce6734) Facebook: [www.facebook.com/realestateespresso](http://www.facebook.com/realestateespresso) Email: [[email protected] ](mailto:[email protected] ) **Y Street Capital:** Website: [www.ystreetcapital.com](http://www.ystreetcapital.com) Facebook: [www.facebook.com/YStreetCapital](https://www.facebook.com/YStreetCapital) Instagram: [@ystreetcapital](http://www.instagram.com/ystreetcapital)
Transcript 0:01 Speaker 00 Welcome to the Real Estate Espresso Podcast or Morning Shot of what's new in the world of real estate investing. I'm your host Victor Minash. On today's show, we're taking a look at construction technology that could revolutionize the way concrete buildings and late-age steel structures are built. The technology is called Hambro. That's spelled H-A-M-B-R-O. We're using it right now for the construction of six apartment buildings. There's two different techniques that are applied for walls and one basic approach in floor slabs. But before we talk about the new technology, it'd be best to talk about the way traditional form concrete is constructed so that we can have a point of comparison. In traditional form concrete structure, you start by erecting forms for your slab and your foundation. You erect
0:45 Speaker 00 forms for your columns and walls. It's done in stages. You set forms for the floor. You insert steel reinforcing bars with spacers to make sure that the steel ends up in the right location in the concrete slab. You insert any conduit that's required for future infrastructure to penetrate the concrete slab, and you pour the concrete and then let it set. All of the finishing steps, like screeding, floating, troweling, polishing, will be done in conventional concrete or the same in Hambro. The next step is to prepare the forms for the walls and the columns. Before you do that, you have to remove the forms from the previous step on the floors. You then install the forms for the walls, and you include all the steel reinforcement that you're going to be erecting, and then
1:29 Speaker 00 you set up the rest of the forms for the walls and columns. You pour the concrete, you let it set. The next step is where things get really interesting. After removing the forms from the walls and from the columns, you start erecting the forms for the floor above with a grid of jackposts that will support the form and the concrete while it's still wet. You then insert the steel rebar and pour the concrete as before. Then you've got to wait for the concrete to fully harden before removing the forms and jackposts from below. The entire process is extremely labor-intensive and time-consuming. It's not fast. It's very, very slow. The complexity is further amplified if you're doing winter concrete and you have to insulate in order for the concrete to cure problems. In conventional concrete, the slab for each floor is somewhere between six to eight inches
2:14 Speaker 00 thick, and the mechanical and plumbing is hung below the concrete ceiling, which results in numerous bulkheads along the window walls to create space for the ducting. The ceiling height is usually nine feet in the center of the room and eight feet wherever you've got ducts enclosed in a bulkhead, and you repeat that process for each floor in the building. In the case of Hambro, we build the forms for the foundation and the main floor slab using styrofoam insulation. This is the traditional ICF foundation that's been used in higher-end construction for many decades. The latest building code requires a higher level of exterior continuous insulation. This is usually rigid styrofoam. So since you're going to be buying styrofoam anyway, you might as well use it to create
2:57 Speaker 00 the form for the concrete and save yourself the step of removing the form and then later applying the styrofoam to the exterior of the building. The forms for the walls and the columns are also made from a combination of light gauge steel and styrofoam. The forms for the walls are sometimes corrugated steel, and the form for the outside of the exterior wall is usually styrofoam, which creates a complete styrofoam envelope for the building exterior. You pour the concrete, and then you immediately start prepping the formwork for the next step in the process. You see, the forms are permanent. That light gauge steel, it remains. Within a day of the previous concrete pour, you're working on forms for the next step. The floor for the next level is where this gets very interesting. There are no forms.
3:39 Speaker 00 You install open web steel trusses spanning from one structural wall to the next, and then you lay down a light gauge steel sheet across the trusses. This becomes the base of the form for the concrete floor. Instead of a six-inch concrete slab, we're going to pour a much lighter four-inch concrete slab. The strength of the floor assembly comes from the combination of the steel trusses, where the bottom chord of the truss is in tension and the concrete on the top is in compression. The trusses are tall, which, when combined with the concrete slab, results in an eighteen-inch floor and ceiling assembly. It's much thicker, considerably thicker than the traditional twelve-inch formed concrete assembly. Now if your zoning can tolerate a taller building, then you just make your building
4:24 Speaker 00 six inches taller per floor. Otherwise, you could have an eight and a half foot finished floor to ceiling in your apartments instead of nine feet. And I can tell you from firsthand experience, an eight and a half foot ceiling height is very acceptable. It doesn't have the closed in feeling of an eight foot ceiling. It really approximates the expansiveness of a nine foot ceiling. The ceiling cavity is much larger and because of the open web trusses, it affords you the flexibility to route all of your mechanical, electrical, and plumbing in the ceiling cavity with no bulkheads. It's a much cleaner finished look. The beauty is that the forms are permanent and they become part of the permanent structure and part of the insulation of the building. There are fewer steps involved in the construction and the time savings are enormous.
5:06 Speaker 00 The reduction in time saves you money, the reduction in labor saves you money. Now you need the Starfoam insulation anyway, so you might as well use it as a permanent form. Hambro does result in cost savings for buildings that are nine stories or less. The maximum height you can achieve with Hambro today is 12 stories. So it's not suitable for high-rise buildings, but if you're building a mid-rise building, the time and the cost savings can definitely be worth considering this technology. Benchmarks I've seen suggest savings between 20 to 40 dollars a square foot compared with traditional formed concrete. We're big fans of the Hambro technology. Like I said, we're using it in several buildings now and I expect we're going to continue to use it for buildings in the future. As you think about that, have an awesome rest of your day. Go make some great things happen.
5:51 Speaker 00 We'll talk to you again tomorrow.
Previous BOM - Day Trading Attention by Gary Vaynerchuk Next Landlord Guarantees with Mark Faris Page updated November 15, 2026 · transcript and summary are machine-generated